Skip to content
🔥 Axicube One already available ➡
🔥 Axicube One already available ➡

TSPROF K03 Pro Sharpening System

SKU TS-K3P220010


Large size - full-size professional sharpening system.

Top-of-the-line - comes with the Axicube-I angle finder.

Reliable materials - 7075T6 aircraft aluminum.

Turning mechanism - keep the same angle on both sides of the blade.

Incredible precision - easy to set the angle thanks to the rack and pinion lift.

Abrasives included - effective, easy to use, and maintain diamond plates.

Sharpening angle - from 8° to 39° per side, maximum total angle - up to 78°.

Blade thickness - up to 7mm/0.275" in.

Blade length - from 60 to 450 mm/2.4" - 17.7" in (in some cases up to 700 mm).

Universal holder - use any flat-end or Edge Pro stones up to 210 mm long.

Out of stock
Sold out
Original price $740.00
Original price $740.00 - Original price $740.00
Original price $740.00
Current price $673.00
$673.00 - $673.00
Current price $673.00


The K03 Pro, TSPROF top-of-the-line sharpener, will help you get a perfectly sharp edge of the blade even faster, with more precision and convenience. Included with the sharpener is Axicube-I, the first electronic angle finder designed specifically for sharpening systems. Setting the angle with an accuracy of 0,1° has never been so easy and convenient, the angle finder is integrated directly into the abrasive holder. The abrasive holder itself consists of two steel guides. A specially shaped coupling ensures a rigid and accurate connection. No deflection and maximum precision. The rack and pinion lift is equipped with a steel rail with involute (toothed) gearing, allowing step-less adjustment of the sharpening angle. The slide is driven by a brass-toothed wheel, the steel-brass pairing ensures smooth movement of the slide. A laser marking of the sharpening angle is affixed to the slide for ease of reference. The K03 Pro requires no calibration and is assembled in minutes.

The K03 Pro body has no horizon deviation and the knife is clamped parallel to the table. The modern rack and pinion lift, which has a rail with involute (toothed) gearing and step-less adjustment, allows you to set the angle with an accuracy of 0.1°. The height adjuster with extended angle, due to its improved design, will allow you to sharpen knives in a range of angles from 8° to 39°, which allows you to sharpen to a total angle of up to 78°.

The sliding part is connected to the base by a dovetail, which guarantees absolute precision of the angle setting. An additional lifting rod is used to increase the angle of sharpening. The locking screw allows the lift to be rigidly fixed during deburring operations. Fixing its position is now more convenient: the locking screw can be installed on both sides of the body. The response part of the lift is made of a durable polymer material - polyacetal. It is a super strong and high-performance polymer with a density of 1.420 g/cm3. Polyacetal has excellent antifriction properties, providing excellent smooth running of the rack and pinion lift. The polymer is black, highly wear and abrasion-resistant. It retains its initial appearance and smooth shiny surface for a long time. A steel rail is responsible for the operation of the lifting mechanism. An angle measurement scale is applied on the front side of the slide and allows you to control the setting of the angle visually.

The unique rotating mechanism has a wide lever that makes rotation easy and ensures reliable auto-locking of the clamping frame. Thanks to the system of springs and bearings, the frame turns over without the wear of the mechanism. The body of the auto-flip system is made of durable aircraft-grade aluminum anodized in black.

The universal holder allows you to use any abrasive stones with the sharpener, both on blanks and without them. The abrasive holder has no metal plate, but thanks to the special geometry of the stops, it allows you to fix the abrasives as securely as possible. The abrasive holder bar has an increased length of 694 mm, is made of steel and has high rigidity. The holder rod is collapsible and joined by an aluminum sleeve coupling, with a three-point mounting, which gives the maximum alignment of the connection. The rod is equipped with a convenient thumbscrew for adjustment which allows the rod to be connected in one motion.

The Axicube-I angle finder is developed specifically for sharpening systems and is integrated into the body of the holder's movable stop which allows real-time monitoring of the sharpening angle. The Axicube is rigidly connected to the abrasive holder and is in the plane of the abrasive stone. This allows maximum angle accuracy during use. Axicube allows you to set the angle with an accuracy of up to 0.1°. The angle finder has a durable aircraft aluminum body and is resistant to vibrations. Can be used in temperatures from 0°C to +40°C. Charges from a standard micro-USB charger. Each Axicube is calibrated at the factory with verified measuring instruments. Before use, a special calibration plate is used to give it an initial reference angle. If the sharpening device is moved to another surface, a new calibration with the plate is required.

The product is not intended for measurements other than sharpening, correct operation of the product is only possible in combination with the TSPROF K03 Pro. The product is NOT COMPATIBLE with TSPROF Kadet and TSPROF Blitz sharpeners. Correct operation of the product with other sharpening systems is not guaranteed.

Whole-milled clamps are made of high-strength black anodized aircraft-grade aluminum. The clamps of this type provide the greatest rigidity and stability of the device. Thanks to the monolithic design of the clamps, their main advantage is the increased resistance to abrasive pressure, which ensures consistency of angles during all phases of work, from roughing to finishing. When working with this type of clamps it is not necessary to calibrate and adjust to different shapes of knives. They have a simple and convenient principle of clamping (using a single L-shaped key), and they allow you to clamp a wide variety of knives, including knives with bevels from the spine, folding knives, kitchen knives, hunting knives, etc.

This TSPROF K03 Pro Sharpening System includes:

  • TSPROF K03 Pro body with Axicube-I angle finder
  • Whole-milled clamps - 2 pcs.
  • Spare parts
  • Packaging: cardboard box with lodgements

Download Manual

More sharpness, more precision, more convenience with TSPROF K03 Pro

The new K03 Pro will help you achieve perfect knife sharpness even faster, with more precision and convenience. Together with the Axicube-i, the first electronic angle finder designed specifically for sharpening systems, it has never been easier or more convenient to set the angle with an accuracy of 0.1°.
The rack and pinion lift is equipped with a steel rack with involute (toothed) gearing for stepless adjustment of the sharpening angle. The K03 Pro requires no calibration and is assembled in minutes


Calibrated steel guides connected by a three-point coupling


*If you flip the hinge unit upside down, you can get a sharpening angle of 60-70° per side.
It is not the recommended method of sharpening



The height adjuster has a steel rod with toothed gearing, which provides stepless adjustment of the sharpening angle



The sharpening angle values are printed on the body of the height adjuster



The fixing screw of the extended height adjuster can be located on either left or right side of the mechanism

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare