Skip to content
🔥 Axicube One already available ➡
🔥 Axicube One already available ➡

[DISCONTINUED] TSPROF K03 Expert Sharpener. Standard kit

  • Trouble-free rotary mechanism
  • Stepless adjustment of the sharpening angle
  • Body of the K03 is made of high-grade D16T aviation aluminum
  • Whole-milled clamps made of aviation aluminum
  • Whole-milled fillet clamps made of aviation aluminum
  • Suitable for all types of knives and tools
  • Professional sharpening results in less than 40 minutes after unpacking


SKU TS-K03200310

This product if DISCONTINUED. The product listing is available for reference only.

Become a knife sharpening professional with TSPROF K03. With two types of clamps and a K03 Expert body, with an increased sharpening angle, this kit is suitable for sharpening 95% of the known knife types. The professional kit covers sharpening angles from 7° to 35° per side. And the device for sharpening in the lens will help to make the sharpening the most stable and durable. The kit is suitable for sharpening most types of knives, including hunting, kitchen and sirloin knives. The unique design of the clamps adapts to the shape of the blade.

The modification of the K03 body has no horizontal deviations, the knife is clamped parallel to the table. The modern rack and pinion lift with stepless adjustment allows you to set the angle with an accuracy of 0.05°. The body with an increased angle will allow you to sharpen knives in the range of working angles from 7° to 35°, which allows you to sharpen knives at a total angle of up to 70°.

The movable part is connected to the base by a dovetail joint, which guarantees absolute accuracy in setting the angle. And an additional locking screw will allow you to fix the lift during grinding operations.

The unique rotating mechanism has a wide lever that facilitates rotation and ensures reliable auto-locking of the clip frame. In the rotating mechanism, we use only the most reliable materials: the body of the rotating mechanism is made of hardened steel. Thanks to the system of springs and bearings, the frame turns over without wear of the mechanism.

Whole-milled clamps are made of high-strength aircraft aluminum. Due to the monolithic design of the clamps, their main advantage is the increased resistance to pressure on the abrasive stone, which ensures constant angles. When working with this type of clamp, calibration, and adjustment to different knife shapes are not required. They have a simple and convenient clamping principle (using a single key), allowing you to clamp a variety of knives, including knives with descents from the spine, folding knives, hunting knives.

Whole-milled fillet clamps are made of aircraft aluminum and are designed for fixing knives with a spine thickness of up to 3.5 mm. The shape of the outer surface is radially convex, allowing you to set the minimum sharpening angles from 7.2°. The clamps are made of a single piece of aluminum, which ensures the symmetry of the installation. Thanks to two gripping points, the deflection of the blade is minimized. It is possible to independently move the clamps along the entire length of the frame. There is no need for calibration. With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels". Suitable for table and fillet-knives with a narrow spine. They make it possible to sharpen: kitchen knives, fillet-knives, keychain-knives, dangerous razors, knives with "Scandi-bevels" and other long narrow knives.

Sharpen knives with any abrasive you like, the K03 universal abrasive holder supports all stones 6" to 8.5" long, doesn’t require 45° bevel on sides.

The 3.5 kg TSPROF steel base holds the sharpener on the table and allows you to work without attaching the sharpening system body with a G-clamp.

The mechanical protractor has a pitch of 1° and helps to control the angle during the sharpening process, when the frame is turned over, when changing the abrasive or sharpening the knife.

The convex edge attachment is presented in the form of a replaceable adapter, which is mounted on the abrasive holder. The adapters provide an even change in the angles along the entire width of the feeds, as a result of the work, the radius shape of the lens is obtained. The adapter has a range of angles of 7.2 degrees. The convex edge is better than V-shaped to withstand shock loads, such as when cutting reeds, coastal shrubs and grass, large raw bones, dead branches. It is also more effective for deep cutting compared to knives with V-shaped grind, provided that the blade thickness is similar - this is due to less 'sticking' to the material. This form is most suitable for long-bladed combat weapons, large knives, and logging axes.

K03 Expert Standard kit contains:

  • K03 Expert body with main units
  • Set of whole-milled clamps (2 pcs)
  • Set of whole-milled fillet clamps (2 pcs)
  • TSPROF steel base for K03 sharpener
  • TSPROF hex screwdriver 4.0 mm
  • TSPROF hex screwdriver 2.5 mm
  • Simple attachment for convex edge (7.2)
  • Manual
  • Packaging: TSPROF Box

Abrasives are not included!
For beginners, we recommend adding a set of diamond plates to the order

Attention! Keep the instructions for the entire warranty period. Warranty service is carried out only in the presence of instructions.


Download manual

Customer Reviews
5.0 Based on 1 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Daniel M.

Is there any one else doing the same?

I am a meat cuter, and I work for a chain supermarket. Last year they did away with our sharpening service.So after doing alot of research on different sharpening devices, I went with tsprof k3. I have the sharpest knives I ever used now!

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare