Skip to content
TSPROF Alpha Resin Bonded Diamond Sharpening Stones — In Stock ✅
TSPROF Alpha Resin Bonded Diamond Sharpening Stones — In Stock ✅

3-Layer Diamond Coated Bars For Reprofiling (4 pcs)

SKU TS-SH2000940


• A set of diamond coated bars for extra coarse sharpening.
• Grit GOST 9206:
- 100/80 equals FEPA F 150;
- 80/63 equals FEPA F 200;
- 50/40 equals FEPA F 240;
- 28/20 equals FEPA F 360.
• Length: 150 mm / 6" inch.
• Width: 20 mm / 0.8" inch.
• Thickness: 3 mm / 0.12" inch.
• Flat end shape.
• Works with all TSPROF sharpeners.

Original price $91.00 - Original price $91.00
Original price
$91.00 - $91.00
Current price $91.00
5+ in stock, ready to be shipped
Email me when available

Three-layer diamond coated bars. This set is designed for roughing and is made on a galvanic bond.

Diamond coated bars are more aggressive than organic and metal bonded diamonds, they provide intensive removal of metal and can be used for the cutting edge of a knife that has significant damage (chips, cracks, rolled over edge parts, e.t.c.). That is due to the fact that diamond coated grits are sticking out from the surface, while metal and organic bonded diamond grits are mixed with the bonding agent.

Each bar has three diamond layers. The concentration of diamonds in a layer is 100%. Each side has the same grit size and can be used for sharpening.

You do not need to flatten/level these diamond bars.

This set of diamond bars comes in a nylon case.


  • Length: 150 mm / 6" inch;
  • Width: 20 mm / 0.8" inch;
  • Thickness: 3 mm / 0.12" inch;
  • Grit (GOST 9206, μm): 100/80, 80/63, 50/40, 28/20 (FEPA F: 150, 200, 240, 360);
  • Diamond Powder Brand: AC15.

Tips for use: Use water for work. During work, keep adding clean warm water when the bar dries and use a brush to remove residue and avoid salting. DO NOT USE OIL! After sharpening, clean the bar and rinse in warm water. Store in a dry place.

Customer Reviews
4.8 Based on 4 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Duane S.
United States

Awesome Bars

I bought these to repair two EDC D2 blades that I messed up pretty bad with an angle grinder. I was never happy with the factory grinds on these blades. Reprofiled one blade and have been using it for about 2 weeks and now I love the knife. Gonna fix the second blade next month. These diamond bars are well worth the money. Saved me from buying 2 new knives and I have a few knives I will be using these on also. 5 STARS!!!!!

david r.
United States United States

Reprofiling Blades

Very good product, well worth it. Will save you a lot of time and stress on your sharpening system.

Enrique R.
United States United States

Diamond Coated Bars

Great for re-profiling the edge on older well used kitchen knives.



Thank you, Enrique!

Asher B.
United States United States

Works Amazing

Works so well for getting a quick edge roughed out to work with!

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare