TSPROF Axicube Shift Electronic Angle Finder for a 6 mm rod is designed for use with the Pioneer system.
Flexible Mounting
The Axicube Shift can be easily and securely fixed to the holder with magnets and a fastening screw, or removed from the rod, reducing the load on the abrasive stone during sharpening.
The screw for securing the angle finder can be installed on the left or right side.
Precision Angle Measurement
The Axicube Shift electronic angle finder attaches to the abrasive holder and displays the sharpening angle with an accuracy of 0.1°.
It helps to monitor the sharpening angle in real time and track any changes, such as when switching abrasive stones.
The bright display is easy to read under any lighting conditions. The Axicube Shift's durable aircraft grade aluminum body is vibration-resistant and has a matte black anodizing coating.
Battery and Charging
Axicube Shift comes with a removable lithium-polymer battery and charges via a USB Type-C port. Charging takes 15–20 minutes at a current of up to 0.5 A and 5 V, and one full charge provides 24 hours of continuous operation.
The angle finder indicates low charge and with a “Lo.” message on the display. For uninterrupted operation, the device requires monthly charging.
Compatibility
Attention! This angle finder is compatible only with TSPROF Pioneer sharpeners.
Because the calibration of the measuring instrument is performed relative to a fixed plane, Axicube Shift is incompatible with TSPROF Kadet and Blitz, where the angle is set by tilting the blade relative to a movable abrasive holder.
Holder Rod Included
This set includes the new abrasive holder rod suitable for use with the Axicube Shift built-in angle finder.
The new holder rod is 228 mm long without the ball-handle, and 242 mm long with the ball-handle.
Charging Recommendations
Important! Charge the angle finder upon receipt. Avoid complete self-discharge. For uninterrupted operation, monthly charging is recommended.
Storage Instructions
Store the angle gauge at a temperature not exceeding +27°C.
Specifications
| Angle measurement range |
0° – 99.9° |
| Measurement accuracy |
±0.10° |
| Pitch |
0.10° |
| Battery / Charging time:
|
180 mah, Li-Pol, 5 V, 0.5 A / 15-20 min |
| Battery performance:
|
24 hours |
| Charging port: |
USB Type-C |
| Charge indicator: |
not present |
| Auto power-off:
|
2 min |
| Compatibility |
TSPROF Pioneer |
Set Includes
-
TSPROF Abrasive Holder With Axicube Shift Built-in Angle Finder, 6 mm - 1 pc.
- Calibration prism - 1 pc.
- USB-Type-C cable - 1 pc.
