![Venev Double Sided Diamond Sharpening Stone, 6", (S), 10/7-5/3 (OSB), 100%](http://tsprof.us/cdn/shop/files/TS-SH2201500_1_700x700.jpg?v=1717507138)
Venev Double Sided Diamond Sharpening Stone, 6", (S), 10/7-5/3 (OSB), 100%
Features:
Features:
Made by Venev Industrial Diamonds Inc. Unlike other abrasive stones, diamond bars have a much slower wear rate, so using them with hard steels is recommended.
This 6" long diamond bar can be used with all TSPROF and other sharpeners.
Both sides are manufactured using the new upgraded OSB binder. This binder differs from others in that it does not use boron carbide. In addition, the abrasive layer here is not sintered, but glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives allows softer and finer work. OSB bond is ideal for hard steel on low angles.
Size: | 150x24x11 mm |
1st side | 10/7 microns / F700 grit |
2nd side: | 5/3 microns / F1100 grit |
Diamond powder concentration: | 100% |
Diamond layer thickness: | 3 mm |
Due to production peculiarities, the width and length of the abrasive may deviate from the values specified in the description by up to 5%.
Recommendations for work:
Use soapy water or oil. Working with oil keeps the process cleaner.
Warning. These bars require careful work: do not apply pressure on the abrasive during sharpening (especially when sharpening the tip of the knife), do not allow the abrasive to come off the blade and do not allow the bar to fall on hard surfaces.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}