Set Of Diamond Plates With A Three-layer Spraying Of 4 Pieces For Rough Sharpening
Three-layer diamond abrasives kit. The set is intended for grinding. Diamonds are made on a galvanic bond. Provide intensive removal of metal and can be used for the cutting edge of a knife that has significant damage (chips, cracks, etc.). They work noticeably more aggressive than diamonds on organic and metal bonds with the same grain size and practically do not grease. This is achieved by the prominent diamond grains, while in the metal and organic binder, the diamond grains are recessed into the binder and mixed with it. The bar contains a triple diamond layer. The diamond layer is located on both sides of the bar, with the same grain on each side. The concentration of diamonds in the layer is 100%. The geometry of the working plane is smooth on both sides, the block does not need to be aligned, the diamond layer is opened during operation. A set of diamond bars comes in a nylon case.
Width: 20 mm
Granularity of the powder (μm): 28/20, 50/40, 80/63, 100/80.
Powder Brand: AC15
Recommendations for use: before starting work, moisten the diamond layer of the bar with water. In the process of sharpening, periodically rinse the diamond layer with clean warm water with a brush and avoid salting. Not intended for use with oil. After stopping work, clean from contamination, rinse in warm water. Store in a dry place.