Set Of Diamond Plates On Blanks (5 Pcs)

Diamond plates made with a galvanic bonding agent provide intensive metal removal and can be used for the cutting edge with significant damage (chips, bends, etc.).

The set of diamond plates on blanks includes:
— F150 Extra Coarse diamond plate is used for roughing of the edge and forming the shape of the blade.
— F220 Coarse diamond plate is used for shaping the cutting edge.
— F400 Medium diamond plate is used for main sharpening operations and creating of the aggressive/biting cut.
— F600 Fine diamond plate is used for pre-finishing of the cutting edge and removing noticeable scratches.
— F1000 Very Fine diamond plate is used for finishing the cutting edge.

These abrasives are much more aggressive than stones on organic or metallic bonding agents with the same grain size. It is achieved due to the protruding diamond grains, whereas grains of the organic or metallic bond get stuck in the binder and mixed with it. The grain concentration in a layer is 100%. At the same time, it should be noted that in terms of the duration of work, such plates will be inferior to plates on other bonds due to a thin layer of spraying, which is actively erased during the sharpening process.

Please bear in mind, if you work with soft steels (up to 58 HRC) these diamond stones will work out faster than if you use them for harder steels.

Diamond stones made with a galvanic bonding agent do not require preparing for work (leveling, "cheering up" etc.).

Abrasive dimensions: 4х25х150 mm
Grit range:
— 150 grit (FEPA-F)
— 220 grit (FEPA-F)
— 400 grit (FEPA-F)
— 600 grit (FEPA-F)
— 1000 grit (FEPA-F)