The K03 Pro is TSPROF'stop-of-the-line sharpener. It will help you get a perfectly sharp edge of the blade faster, with more precision and convenience.
Convenient angle setting and real-time monitoring
K03 Pro comes with the Axicube-I, the first electronic angle finder designed for sharpening systems. It is integrated into the body of the abrasive holder's movable clamp and allows real-time monitoring of the sharpening angle with an accuracy of up to 0.1°
It has a durable aircraft aluminum body resistant to vibrations and can be used in temperatures from 0°C to +40°C. Built-in battery charges via USB-Type-C cable.
Each Axicube-i is calibrated at the factory. Before first use on the new surface, you have to calibrate it using a special calibration plate to set an initial reference angle. If you move the K03 Pro to another surface, you will need to calibrate the angle finder again.
Axicube-i is not intended for measurements other than sharpening, its correct operation is guaranteed only with K03 Pro, and it is not compatible with other TSPROF or different brand sharpeners.
One hand stepless angle setting
The K03 Pro has a rack-and-pinion height adjuster with a sliding part with toothed gearing, which allows stepless adjustment of the sharpening angle in the range from 10° to 39° (from 8.5° with fillet clamps) with a total angle of up to 78°.
The height adjuster has an additional rodthat can be used either to increase the angle to the maximum value or to compensate for the stone thickness and can be locked with a screw on both sides of the body.
The sliding part is driven by a brass-toothed wheel andconnected to the response part with a dovetail, which ensures angle setting absolute precision. The steel-brass pairing ensures smooth movement of the slide.
The angle measurement scale is laser printed on the front side of the slide for visual control of the angle setting.
One-hand hassle-free knife flipping
The unique semi-automatic turning mechanism can be activated with adjustable pressure and has reliable auto-locking. Thanks to the system of springs and bearings, the clamping frame turns over without the mechanism wearing out. The permissible error when turning the clamping arm is 0.3°.
Flat-end or backed stones up to 8" in. long
The universal abrasive holder has no metal backing plate (compared to older K03 versions) and allows you to use any abrasive stones with the sharpener, both on a backing plate and without it, thanks to the special geometry of the abrasive clamps, which fix the abrasives as securely as possible.
The high-rigidity steel rod has an increased length of 694 mm. It consists of two parts connected with an aluminum sleeve coupling with a three-point mounting, giving the connection maximum alignment. The coupling is locked with a convenient thumbscrew which allows one motion locking.
Universal whole-milled clamps
The whole-milled clamps are made of high-strength anodized 7075 T6 aircraft aluminum. The full metal design offers increased resistance to abrasive pressure and ensures sharpening angle consistency at all stages - from roughing to finishing.
Whole-milled clamps do not require calibration or adjustment for different blade types. They have a simple and convenient clamping principle (using one L-shaped hex key), and allow you to clamp a wide variety of knives: utility, fixed, folding, pocket, kitchen, hunting knives, etc.
Diamond abrasives included
Diamond-coated plates provide intensive metal removal and can be used for a cutting edge with significant damage (chips, bends, etc.). Use dry, without water or oil.
Includes the following grit range: — F150 Extra Coarse - for profiling, and shaping the edge. — F220 Coarse - reducing sharpening scratches. — F400 Medium - reducing sharpening scratches, biting edge. — F600 Fine- pre-finishing, biting edge. — F1000 VeryFine- finishing, deburring, gives mirror polish for some steels.
Kit includes
TSPROF K03 Pro AL Hunter includes:
TSPROF K03 Pro AL body with Axicube-I angle finder
Whole-milled clamps - 2 pcs.
Set of 5 diamond plates
Spare parts
Steel stand
Packaging: wooden shipping box with foam inserts
Attention! Charge the angle finder when you receive it. Do not allow full self-discharge. The device requires charging monthly to ensure continuous operation.
I ordered this a week ago to upgrade from a worksharp precision adjust elite. Received yesterday and finally had an opportunity to assemble. Contrary to videos posted online, the QC (quality control) of this product is absolute horrible for the price. There are sharpening systems available on amazon for less than $100 that have better QC. The coupler designed to hold the guide rod and the abrasive rod together is machined so out of tolerance that it actually creates a slight angle in the overall rod (when fastened) creating all sorts of geometric issues when trying to sharpen evenly.
After calling repeatedly, a customer service representative by the name of Arnold is the only person that takes calls in the United States. He is very friendly but has no authority without communicating with a lady located overseas by the name of Polina. I have yet to get a response as to how they're going to handle this but after spending close to $1,000 for the unit and some additional blade holding accessories, buyer beware. There's no sense in paying close to $1,000 for poorly machined metal. You can find better for a fraction of the price.
Dear Dave,
I am terribly sorry about the issue with the defective coupling. We already filed a complaint with the QCD and will make sure this never happens again.
We provided a replacement of the whole rod, including coupling and Axicube-I.
As far as I understand defective coupling was the only issue with your sharpening kit. Please let us know if you faced/will face any other issues during the use of your K03 - we are always happy to help!
Thank you for taking time to leave feedback. Stay sharp!
DO
09/16/2024
Donald o.
United States
Quility
Machining is just incredible and it works better than I ever imagined I'm a meat cutter so sharp knife important and this is next level
