Features:
The K03 Pro is TSPROF's top-of-the-line sharpener. It will help you get a perfectly sharp edge of the blade faster, with more precision and convenience.
This is a virtual bundle that includes the original K03 Pro AL hunter kit and a set of quick clamps.
Quick clamps are brand new type of clamps that include a quick-release mechanism. They open up a new level of sharpening convenience: knife clamping takes just one movement and no longer requires a screwdriver. It is a perfect solution for chefs and mass knife sharpening.
K03 Pro comes with the Axicube-I, the first electronic angle finder designed for sharpening systems. It is integrated into the body of the abrasive holder's movable clamp and allows real-time monitoring of the sharpening angle with an accuracy of up to 0.1°
It has a durable aircraft aluminum body resistant to vibrations and can be used in temperatures from 0°C to +40°C. Built-in battery charges via USB-Type-C cable.
Each Axicube-i is calibrated at the factory. Before first use on the new surface, you have to calibrate it using a special calibration plate to set an initial reference angle. If you move the K03 Pro to another surface, you will need to calibrate the angle finder again.
Axicube-i is not intended for measurements other than sharpening, its correct operation is guaranteed only with K03 Pro, and it is not compatible with other TSPROF or different brand sharpeners.
The K03 Pro has a rack-and-pinion polyacetal height adjuster with a sliding part with toothed gearing, which allows stepless adjustment of the sharpening angle in the range from 10° to 39° (from 8.5° with fillet clamps) with a total angle of up to 78°.
The height adjuster has an additional rod that can be used either to increase the angle to the maximum value or to compensate for the stone thickness and can be locked with a screw on both sides of the body.
The sliding part is driven by a brass-toothed wheel and connected to the response part with a dovetail, which ensures angle setting absolute precision. The steel-brass pairing ensures smooth movement of the slide.
The response part is made of a durable black polymer material - polyacetal. It is a super strong, high-performance polymer with a density of 1.420 g/cm3. Polyacetal has excellent antifriction properties, it is highly wear-resistant, provides smooth running of the rack and pinion lift, and retains its initial appearance and smooth shiny surface for a long time.
The angle measurement scale is laser printed on the front side of the slide for visual control of the angle setting.
The unique semi-automatic turning mechanism can be activated with adjustable pressure and has reliable auto-locking. Thanks to the system of springs and bearings, the clamping frame turns over without the mechanism wearing out. The permissible error when turning the clamping arm is 0.3°.
The universal abrasive holder has no metal backing plate (compared to older K03 versions) and allows you to use any abrasive stones with the sharpener, both on a backing plate and without it, thanks to the special geometry of the abrasive clamps, which fix the abrasives as securely as possible.
The high-rigidity steel rod has an increased length of 694 mm. It consists of two parts connected with an aluminum sleeve coupling with a three-point mounting, giving the connection maximum alignment. The coupling is locked with a convenient thumbscrew which allows one motion locking.
The whole-milled clamps are made of high-strength anodized 7075 T6 aircraft aluminum. The full metal design offers increased resistance to abrasive pressure and ensures sharpening angle consistency at all stages - from roughing to finishing.
Whole-milled clamps do not require calibration or adjustment for different blade types. They have a simple and convenient clamping principle (using one L-shaped hex key), and allow you to clamp a wide variety of knives: utility, fixed, folding, pocket, kitchen, hunting knives, etc.
Diamond-coated plates provide intensive metal removal and can be used for a cutting edge with significant damage (chips, bends, etc.). Use dry, without water or oil.
Includes the following grit range:
— F150 Extra Coarse - for profiling, and shaping the edge.
— F220 Coarse - reducing sharpening scratches.
— F400 Medium - reducing sharpening scratches, biting edge.
— F600 Fine - pre-finishing, biting edge.
— F1000 Very Fine - finishing, deburring, gives mirror polish for some steels.
Achieve impeccable knife sharpness with precision and convenience.
Built-in Axicube-i electronic angle finder makes angle setting easy and convenient, and offers accuracy of 0.1°.
The rack and pinion lift is equipped with a steel rack with involute (toothed) gearing for stepless adjustment of the sharpening angle.
The K03 Pro requires no calibration and is assembled in minutes
Calibrated steel guides connected by a three-point coupling
The height adjuster has a steel rod with toothed gearing and provides stepless adjustment of the sharpening angle
Adjustment screws are left-hand/right-hand friendly
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
